Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!rpi!zaphod.mps.ohio-state.edu!usc!elroy.jpl.nasa.gov!ames!pacbell!att!cbnewsd!heneghan
From: heneghan@cbnewsd.ATT.COM (joseph.t.heneghan)
Newsgroups: comp.sys.ibm.pc
Subject: Compaq 386 serial port?
Keywords: db9->db25
Message-ID: <13215@cbnewsd.ATT.COM>
Date: 15 Feb 90 16:12:42 GMT
Organization: AT&T Bell Laboratories
Lines: 7

I have a compaq 386 with the serial port (db9) and parallel port (db25)
on the same expansion board, the stock Compaq configuration. I want to
connect a Hayes modem to the db9. Is there a standard connector for this
configuration, or do I have to cobble something up?
					Joe Heneghan
					att!ihlpl!heneghan