Xref: utzoo comp.sys.ibm.pc.rt:1403 comp.periphs:2598 Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!rpi!zaphod.mps.ohio-state.edu!think!snorkelwacker!spdcc!dyer From: dyer@spdcc.COM (Steve Dyer) Newsgroups: comp.sys.ibm.pc.rt,comp.periphs Subject: Re: Side rails for IBM RT 6150 hard disks. Message-ID: <1750@ursa-major.SPDCC.COM> Date: 19 Feb 90 16:40:39 GMT References: Reply-To: dyer@ursa-major.spdcc.COM (Steve Dyer) Organization: S.P. Dyer Computer Consulting, Cambridge MA Lines: 16 In article ehrlich@cs.psu.edu (Daniel Ehrlich) writes: >We have purchased MAXSTOR 4380E diskdrives to install in to out RT 6150s. If you ever get them to work, let me know. I'd start lining up a buyer and buy a few Maxtor SCSI drives and use Christer Bernerus' Adaptec AHA1540 SCSI disk and tape driver for AOS 4.3. It really works great. >We will also need the rails that the drives ride on in the hangers in the >chassis. Does anyone have a source for these rails? These are literally a dime a dozen, if you know of the right place. Any "Mom 'n Pop" PC-clone store will sell rails for drives. -- Steve Dyer dyer@ursa-major.spdcc.com aka {ima,harvard,rayssd,linus,m2c}!spdcc!dyer dyer@arktouros.mit.edu, dyer@hstbme.mit.edu