Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!umeecs!dip.eecs.umich.edu!arie
From: arie@dip.eecs.umich.edu (Arie Covrigaru)
Newsgroups: comp.sys.mac
Subject: Re: Problem with 6.0.4 and background printing - Help!
Message-ID: <1325@zipeecs.umich.edu>
Date: 31 Jan 90 02:49:49 GMT
References: <1988@dover.sps.mot.com> <26283@cup.portal.com>
Sender: news@zip.eecs.umich.edu
Reply-To: arie@eecs.umich.edu (Arie Covrigaru)
Distribution: usa
Organization: University of Michigan EECS Dept., Ann Arbor, MI
Lines: 16

In article <26283@cup.portal.com> Fabian@cup.portal.com (Fabian Fabe Ramirez) writes:
>Steve,
>
>use SuperLaserSpool 2.01.
>
>Fabian Ramirez
>SuperMac Technology
>
Is SuperLaserSpool 2.01 compatible with FileMaker II? I know that 2.0
isn't, when using FileMaker II in shared mode and I wonder if this 
incompatibility was fixed in SuperLaserSpool 2.01.

=============================================================================
Arie Covrigaru                     |    Internet: arie@eecs.umich.edu
University of Michigan AI Lab      |    1101 Beal Ave., Ann Arbor, MI 48109
=============================================================================