Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!umeecs!dip.eecs.umich.edu!arie
From: arie@dip.eecs.umich.edu (Arie Covrigaru)
Newsgroups: comp.sys.mac
Subject: Re: Problem with 6.0.4 and background printing - Help!
Message-ID: <1485@zipeecs.umich.edu>
Date: 17 Feb 90 02:49:08 GMT
References: <1988@dover.sps.mot.com> <26283@cup.portal.com> <1325@zipeecs.umich.edu> <26991@cup.portal.com>
Sender: news@zip.eecs.umich.edu
Reply-To: arie@eecs.umich.edu (Arie Covrigaru)
Distribution: usa
Organization: University of Michigan EECS Dept., Ann Arbor, MI
Lines: 23

In article <26991@cup.portal.com> Fabian@cup.portal.com (Fabian Fabe Ramirez) writes:
>Arie,
>
>Unfortunately, FileMaker II does not support spoolers.  Claris is aware of the
>problem and hopes to rectify the situation in a future release.
>
>Fabian Ramirez
>SuperMac Technology
>
>fabian@cup.portal.com
>sun!cup.portal.com!fabian

Now, this is very interesting.  I talked to one of your tech support people 
about a week ago, asking if upgrading to version 2.01 of SuperLaserSpool will
work with FileMaker II and he said he has never heard of any incompatibility 
problems.  Maybe he should be replaced with someone who has.  In any case,
thanks for the info.  Incidentally, FileMaker II does work with Apple's
PrintMonitor.

=============================================================================
Arie Covrigaru                     |    Internet: arie@eecs.umich.edu
University of Michigan AI Lab      |    1101 Beal Ave., Ann Arbor, MI 48109
=============================================================================