Xref: utzoo comp.sys.mac.hardware:1644 comp.sys.mac:48646
Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!jason
From: jason@cs.utexas.edu (Jason Martin Levitt)
Newsgroups: comp.sys.mac.hardware,comp.sys.mac
Subject: TEAC N50 tape drive problem. HELP!
Keywords: faceplate, faceplate, faceplate
Message-ID: <1126@gort.cs.utexas.edu>
Date: 14 Feb 90 21:49:12 GMT
Followup-To: comp.sys.mac.hardware
Organization: U. Texas CS Dept., Austin, Texas
Lines: 18


  I've been trying to remove the 3.5" faceplate from
a TEAC N50 tape drive so that I can put the 5.25"
faceplate on. One screw is easily accessible. The other
screw, however, is hidden under a flat piece of metal. In 
order to remove that piece of metal, two *very* tiny screws
must be removed. I have been unable to remove either of the two
screws even when using the appropriate jeweler's screwdriver. 
Can anyone help?

    j
-----

Jason Martin Levitt    P.O. Box 49860  Austin, Texas 78765  (512) 459-0055
Internet: jason@cs.utexas.edu         | "Disneyland exemplifies the essence of
UUCP    : cs.utexas.edu!hackbox!jason |  the American spirit and continues to
BIX     : jlevitt                     |  show us the way to follow our dreams."
                                      |             -Ronald Reagan [1990]