Path: utzoo!attcan!uunet!jarthur!usc!wuarchive!swbatl!texbell!mailrus!frith!upba!tssi!nolan
Newsgroups: comp.sys.ncr
Subject: Interconnecting Towers and IMOS/IRX/ITX boxes
Message-ID: <119@texbell.swbt.com>
Date: 13 Feb 90 17:44:10 GMT
Lines: 27
Resender: towers@texbell.swbt.com (NCR Tower Mailing List)

Hi.
 
I am writing a column for NCR MONTHLY devoted to the problems encountered
trying to interconnect NCR Tower's with NCR I boxes, primarily ITX, but
IRX and IMOS would probably also apply.
 
I would appreciate hearing from NCR users who have any experience, good OR
bad, with this process.  So far, I have managed to interconnect my NCR 9300
and 9400IP with my Tower 450 as terminal devices (e.g., using cu), but
I am also interested in experiences with other protocols, especially
using TAM.
 
This column is scheduled to appear in the April, 1990, issue of NCR MONTHLY.
 
You may e-mail me directly with your experiences, although you may also want
to place it in the newsgroup.  If telephone contact would be useful, you may
send me your phone number.  Mine is (402) 423-1490.
 
Hopefully, the network address supplied is sufficient, as I am still trying
to make sure my map entry is correct.
 
Thanks.

Mike Nolan                          (frith.egr.msu.edu!upba!tssi!nolan)
Tailored Software Services, Inc.
Lincoln, Nebraska
(402) 423-1490