Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!uakari.primate.wisc.edu!dogie.macc.wisc.edu!decwrl!shlump.nac.dec.com!decuac!hadron!inco!newman
From: newman@inco.UUCP (Bo Newman)
Newsgroups: comp.sys.tandy
Subject: 1000TL W/ Windows or DESQview
Summary: Information Request
Keywords: 1000TL EMS Windows DESQview
Message-ID: <7923@inco.UUCP>
Date: 20 Feb 90 17:12:57 GMT
References: <1990Feb19.051532.22981@Neon.Stanford.EDU>
Reply-To: newman@inco.UUCP (Bo Newman)
Organization: McDonnell Douglas Electronic Systems, McLean, VA
Lines: 28

I have a TANDY 1000TL and am considering going to either a WINDOWS
or DESQView environment supported by EMS 4.0 memory.  I am
currently running with a TANDY CGA monitor and the standard
internal Tandy CGA adaptor that came on the machine.  My questions
are:

1)	Which EMS 4.0 boards are compatible with (and will fit) the
     1000TL?

2)	Are there any limitations or problems in running either of
     these packages on the 1000TL?

3)	Are either of these packages designed to run well under the
     TANDY CGA implementation or do they require higher resolution
     graphics capabilities?

Any additional comments or experiences you might be able to relate
will be appreciated.

===================================================================
:Bo Newman	 newman@inco.uu.net	      uunet!inco!newman	  : 
:McDonnell Douglas Electronics Systems Company (MDESC)  	  :
:McLean Virginia						  :
:Voice   (703) 310-2730                                           :
:Fax USA (703) 883-3889	         				  :
-------------------------------------------------------------------
:  ALL STANDARD DISCLAIMERS APPLY				  :
===================================================================