Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!mips!apple!voder!zok!wattres!steve From: steve@wattres.UUCP (Steve Watt) Newsgroups: comp.unix.ultrix Subject: Serial problems on DecStations? Summary: Doesn't seem to work real well Message-ID: <422@wattres.UUCP> Date: 15 Feb 90 07:08:32 GMT Reply-To: steve@wattres.UUCP (Steve Watt) Organization: Steven Watt, Consultant Lines: 16 I was trying to get a Ventel Pathfinder 18K up on a DecStation 3100 running UWS 2.1, and having absolutely no success. The Ventel looks like a Telebit T1000, mostly. My problem: If I set up the /etc/remote file so it has some 19200 baud entries, add it to my L-devices, and then try to cu to it, cu (which dumps core if not invoked exactly right) says "Connected", and then typing "AAAT" does not get me an OK. It does work when attached to a PC. I hooked in the breakout box, and did not see any notable differences in the signals going into the modem. Dropping the speed doesn't do anything, until you get down to 2400 baud. Then it works OK. Ugh. Any suggestions out there?? -- Steve Watt ...!claris!wattres!steve wattres!steve@claris.com is reported to work. Is rm -rf a way to remove high-frequency noise? (No names mentioned! :-)