Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!cs.utexas.edu!tut.cis.ohio-state.edu!snorkelwacker!mit-eddie!bu.edu!dartvax!creare!inb
From: inb@creare.creare.UUCP (Ian Brown)
Newsgroups: comp.unix.xenix
Subject: HP/LaserJet problems
Message-ID: <INB.90Feb16133014@creare.creare.UUCP>
Date: 16 Feb 90 18:30:14 GMT
Sender: inb@creare.UUCP
Organization: Creare Inc., Hanover NH
Lines: 12


Does anyone have experience running an HP/LaserJet II off a Compaq
Deskpro 386 running Xenix?  Specifically, the LaserJet takes a long time
to produce a plot under Xenix, but not under DOS (8+ minutes for Xenix,
1+ for DOS).  We've also run a QMS 810 in LaserJet emulation mode (1+
minutes DOS or Xenix).

The system is a Compaq Deskpro 386/20 running Xenix V2.3.1.
--
===============================================================================
							Ian Brown
							..!dartvax!creare!inb