Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!brutus.cs.uiuc.edu!jarthur!polyslo!vlsi3b15!vax1.cc.lehigh.edu!netnews.upenn.edu!cps3xx!delong
From: delong@frith.egr.msu.edu
Newsgroups: comp.dcom.lans
Subject: Re: Multiple Servers
Message-ID: <6538@cps3xx.UUCP>
Date: 21 Feb 90 00:56:48 GMT
Sender: usenet@cps3xx.UUCP
Reply-To: delong@frith.egr.msu.edu ()
Lines: 17

The net address setup for each adaptor durring installation must be
the same for those adaptors connected to the same physical network.
(Different for each physical network.)

For example:

Local Net 1                  Backbone               Local Net 2
--------------            -----------------      ----------------
	   |               |             |        |
	   -- Server 1 -----             - Server 2
       (1)                (2)          (2)         (3)

     These numbers in "()" are those hex numbers you get to assign.

Keith
delong@frith.egr.msu.edu
Delta College