Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!ogicse!decwrl!pyramid!leadsv!oetl!alan
From: alan@oetl.UUCP (Alan Strassberg)
Newsgroups: comp.dcom.lans
Subject: Re: Multiple Novell Servers on on eEthernet
Keywords: LANS, NOVELL
Message-ID: <511@oetl1.oetl.UUCP>
Date: 22 Feb 90 00:18:50 GMT
References: <539@opus.NMSU.EDU>
Reply-To: alan@oetl.UUCP (Alan Strassberg)
Organization: Lockheed Missiles & Space Co., Santa Cruz, CA.
Lines: 15

In article <539@opus.NMSU.EDU> rocks@nmsu.edu (Dave Rocks) writes:
[..]
>	problems putting multiple Novell servers on the same wire. As soon
>	as the second system is fired up, both systems get ROUTER errors and
>	they both hang up. We have been told multiple servers are possible,

	The 'Router configuration error' means the servers
	have different addresses. Use the same address for both
	when you netgen. Type 'config' on the server to see the
	addresses you've used.

					alan
-- 
Alan Strassberg             alan@oetl.scf.lockheed.com
(408) 425-6139              ...!uunet!lstc!oetl!alan