Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!uwm.edu!mailrus!accuvax.nwu.edu!nucsrl!telecom-request From: tronix@polari.UUCP (David Daniel) Newsgroups: comp.dcom.telecom Subject: Re: Need Advice on Choosing PBX System Message-ID: <4325@accuvax.nwu.edu> Date: 24 Feb 90 04:25:06 GMT Sender: news@accuvax.nwu.edu Reply-To: tronix@.UUCP (David Daniel) Organization: PolarServ, Seattle WA Lines: 34 Approved: Telecom@eecs.nwu.edu X-Submissions-To: telecom@eecs.nwu.edu X-Administrivia-To: telecom-request@eecs.nwu.edu X-Telecom-Digest: Volume 10, Issue 126, Message 5 of 11 If you're sure that you want a digital PBX and you'll need 24 trunks and 76 phones, you're farther along than most customers are. In you plan on installing a LAN there likely isn't any need for simultaneous voice/data. That feature is normally used by companies that have computers located throughout their location that need to occaisionally communicate with each other. If you know you'll be putting in a LAN then you're best bet is to keep voic and data wiring separate. You may want to survey your present staff to determine what they like about your present phone system and what they don't like. Put a wish-list together that includes all features desired, even if you're not sure if they're possible. This list will allow a seller to determine the best make and model of equipment for your needs and wants. To get familiar with makers and applications I suggest you read Teleconnect Magazine. Your local library should have it. As for the makers I suggest you look into: Mitel - The 200 series with Generic 217 or above software. The Mitel SX-50 would also fit well, but if you have 24 trunks you may want to look into T1 service. The 200 series with 1003 software would work well and likely save you money using T1. The Fujitsu Focus series is also worth a look, tho with the tariffs, this equipment may be hard to get or more expensive than it should be. "What's so funny 'bout peace, love & understanding?" Elvis Costello