Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!willett!ForthNet
From: ForthNet@willett.UUCP (ForthNet articles from GEnie)
Newsgroups: comp.lang.forth
Subject: Help requested (Forth System move)
Message-ID: <564.UUL1.3#5129@willett.UUCP>
Date: 26 Feb 90 23:17:37 GMT
Organization: Latest link in the ForthNet chain.  (Pgh, PA)
Lines: 19


 Date: 02-25-90 (23:39)              Number: 247 (Echo)
   To: GARY SMITH                    Refer#: 138
 From: JERRY SHIFRIN                   Read: NO
 Subj: HELP REQUESTED (FORTH SYS     Status: PUBLIC MESSAGE

 GS> Has anyone tried out F-PC35 on a 386/dos system?
 GS> Does F-PC35 support the 386?  Is there a 386 assembler
 GS> available for F-PC35?

 Gene Czarcinski is our resident expert on running F-PC on a 386.
 He write a 386 assembler for it which should be up on GEnie. See
 PASM386C.ZIP or something similar.  (Let me know if its' not
 here).
 ---
  * QDeLuxe 1.10 #214s
-----
This message came from GEnie via willett through a semi-automated process.
Report problems to: 'uunet!willett!dwp' or 'willett!dwp@gateway.sei.cmu.edu'