Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!usc!brutus.cs.uiuc.edu!lll-winken!sun-barr!newstop!sun!imagen!atari!towns
From: towns@atari.UUCP (John Townsend)
Newsgroups: comp.os.minix
Subject: Re: ST 1.5.0 last part
Message-ID: <2050@atari.UUCP>
Date: 23 Feb 90 21:52:03 GMT
References: <1119@prles2.prl.philips.nl>
Organization: Atari Corp., Sunnyvale, CA
Lines: 33

in article <1119@prles2.prl.philips.nl>, meulenbr@cstw68.prl.philips.nl (Frans Meulenbroeks) says:
> 
> Hi!
> 
> some people pointed out to me that I left out the kernel crc's.
> After applying the patches I send out you should end with the crc's
> below. 
> 
> A few people have reported crc mismatches for a few files.
> I'll include complete copies of these in the 1.5.0 -> 1.5.3
> upgrade. Also the crc's I send out for a.out.h out.h setjmp.h and
> config.h were wrong or missing. Since I sent out complete files for
> these, you should just ignore the wrong crc's.
> 
> If all works out fine I'll post the 1.5.3 upgrades soon.
> Meanwhile save the PC postings from ast. Most of them will
> be applicable out of the box...
> 
> Frans Meulenbroeks        (meulenbr@cst.philips.nl)
> 	Centre for Software Technology
> 	( or try: ...!mcsun!phigate!prle!cst!meulenbr)

Frans,

I am alittle confused about the upgrade process. I have MINIX 1.1 for the
ST which I just purchased. How do I upgrade to 1.5.0 or 1.5.3 with the 
stuff I have now? Also, how do I get the patches and information on how to
apply those patches?

Any help would be very much appreciated!

-- John Townsend				ames!atari!towns
   Atari Corporation, Systems Test