Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!emory!hubcap!ncrcae!sauron!stevem From: stevem@sauron.Columbia.NCR.COM (Steve McClure) Newsgroups: comp.periphs Subject: Re: ST506-SCSI Converters Message-ID: <2003@sauron.Columbia.NCR.COM> Date: 23 Feb 90 16:17:52 GMT References: <3693@alliant.Alliant.COM> Reply-To: stevem@sauron.UUCP (Steve McClure) Distribution: na Organization: E&M-Columbia, NCR Corp, W Columbia, SC Lines: 20 In article <3693@alliant.Alliant.COM> eaw@alliant.Alliant.COM (Eric Woudenberg) writes: *In article <...> writes: ** **OK, who wants to stick their neck out and give me a vendor **and a contact phone number (if possible) for Adaptek ... * *In my previous followup I goofed on some facts. The adaptec *board for doing RLL encoding is the 4070 (as someone else *posted). Also, the OMTI 7200 does ESDI as well as ST506. I *don't know if it does RLL. * *Eric Woudenberg I thought the 4070 was for ESDI->SCSI. Steve ----- Steve.McClure@Columbia.NCR.COM The above are my opinions, which NCR doesn't really care about anyway! CAUSER's Amiga BBS! | 803-796-3127 | 8pm-8am 8n1 | 300/1200/2400