Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!brutus.cs.uiuc.edu!apple!snorkelwacker!bloom-beacon!eru!luth!sunic!tut!santra!hemuli.tik.vtt.fi!hemuli!ajk From: ajk@tikvtt.tik.vtt.fi (Kortekangas Atte) Newsgroups: comp.protocols.appletalk Subject: NCSA telnet (standalone) -- zones Message-ID: Date: 21 Feb 90 15:47:56 GMT Sender: news@hemuli.tik.vtt.fi Organization: Technical Research Centre of Finland, Laboratory for Information Processing (VTT/TIK) Lines: 24 Is it possible to telnet/ftp from a different LocalTalk zone through a LocalTalk bridge and a Kinetics Fastpath 4? We are using NCSA telnet 2.3 and K-star 7.0. Especially, I am thinking of the following configuration, ------- LocalTalk ------------------- LocalTalk -------------- Ethernet I Mac I==============I Shiva NetBridge I=============I FastPath 4 I=====... ------- zone 1 ------------------- zone 2 -------------- zone 3 The documentation for NCSA Telnet 2.3 mentions option "zone=...", but we haven't had the desired effect. The documentation for K-star 7.0 is somewhat superficial at this point. It looks as if the telnet on the mac could contact the Fastpath 4, but TCP/IP messages won't get routed back. The basic configuration (1 LocalTalk net, 1 EtherTalk, 1 DDP/UDP network as one zone) works. -- Atte Kortekangas : Tel/puh. (+358-0)4356-6039 VTT/TIK : telefax (+358-0)489519 Lehtisaarentie 2 A : telex 122972 vttha sf SF-00340 HELSINKI : Internet: kortekangas@tik.vtt.fi FINLAND : EARN: kortekan@FINVTT : elisa: funet:kortekangas@tik.vtt.fi Kortekangas_Atte_VTT