Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!zardoz.cpd.com!durin!frankh From: frankh@durin.sparta.COM (Frank Halsema) Newsgroups: comp.protocols.appletalk Subject: MacTCP/Telnet Message-ID: <1582@durin.sparta.COM> Date: 21 Feb 90 05:15:23 GMT Organization: SPARTA Inc. Laguna Hills Operations. CA Lines: 61 I seem to have a simple setup problem but just can't get it right. I am trying to run NCSA Telnet with MacTCP. When I execute it, Telnet brings up the intial logo window for a few seconds and then exits. I think the problem is the MacTCP start up. Here is my configuration. The net has two bridges. A Hayes interbridge and a Kinetics KFPS 4. The KFPS 4 is running K-star vers. 8. I am using atalkad on a Sun. My KFPS has CONFIGURATION: Atalk Phase 2 K-Star IP Atalk Phase 1 LocalTalk EtherTalk 2 Ethertalk 1 Zone * Start 1 Zone * Net # 0 End 1 Net 0 Node # 220 Net 1 Node 195 Node 195 IP INFO FP Box 192.0.0.195 (all else 0.0.0.0) IP CLIENTS Dynamic 0 Static 0 ADMIN Host 192.0.0.7 IPTALK Zone * Net 0 Node 195 All other fields are 0 Options 4 and 17 are on. My atalkatab has: 55.0 N0 192.0.0.0 SpartaLH-Ether #Laguna Eng, appletalk-in-IP 57.0 E 192.0.0.195 SpartaLH-ET #Laguna Eng, ethertalk 56.0 KC 192.0.0.195 SpartaLH-4th-AT #Laguna Eng, 4th floor localtalk I192.0.0.0 I192.0.0.7 #ipbroad ipname I192.0.0.7 L0 #ipdebug ipfile L0 L0 L0 L0 S57.0 S0 #ipother atnetet ddprangestart LX0 S3 S40 #flags ipstatic ipdynamic S56.0 S55.0 "SpartaLH-Ether"#atneta atnete zonea I set up MacTCP to be in the zone SpartaLH-4th-AT and gave it an address of 192.0.0.196. The Mac host file has these entries durin.sparta.com. A 192.0.0.7 mac.sparta.com. A 192.0.0.196 Lastly my config.tel for NCSA has these changes zone="SpartaLH-4th-AT" name=durin; hostip=192.0.0.7; nameserver=1 If anyone has any ideas I Thanks in advance. -- Frank Halsema UUCP: durin!frankh SPARTA, Inc. ARPA: frankh@durin.sparta.com 23041 de la Carlota, Suite 400 Laguna Hills Ca, 92653 (714) 768-8161 EXT 339 (714)583-9114 FAX