Xref: utzoo comp.unix.xenix:10243 comp.protocols.tcp-ip:10348
Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!mcsun!unido!orfeo!peter
From: peter@orfeo.radig.de (Peter Radig)
Newsgroups: comp.unix.xenix,comp.protocols.tcp-ip
Subject: Problems with TCP/IP and Xenix using a ix386 with 33 MHz
Keywords: tcp/ip xenix autoboot
Message-ID: <1990Feb21.180010.3713@orfeo.radig.de>
Date: 21 Feb 90 18:00:10 GMT
Organization: Peter Radig, Frankfurt, West Germany
Lines: 23

Does someone knows how to use TCP/IP under Xenix using a ix386 with
33 MHz???

I had the following configuration:

	Tandon AT386/33
	WD 8003 EtherCard Plus
	5 MB

	XENIX 2.3.2
	TCP/IP 1.0.0

When I try to boot from the kernel with TCP/IP linked the system
`autoboots' (i.e. it resets the system *before* any copyright or init
message is displayed).

When I set the HW setup to use only 8 MHz there is no problem any more...

Any hints?

Thanks a lot.
Peter
-- 
Peter Radig
Voice: +49 69 746972
USENET: peter@radig.de  or:  uunet!unido!radig!peter