Path: utzoo!attcan!uunet!snorkelwacker!apple!voder!dtg.nsc.com!waggoner
From: waggoner@dtg.nsc.com (Mark Waggoner)
Newsgroups: comp.sys.amiga
Subject: Re: MSH
Message-ID: <388@icebox.nsc.com>
Date: 22 Feb 90 17:45:37 GMT
References: <23012@usc.edu> <2898@jato.Jpl.Nasa.Gov>
Reply-To: waggoner@icebox.UUCP (Mark Waggoner)
Organization: National Semiconductor, Santa Clara
Lines: 24

In article <2898@jato.Jpl.Nasa.Gov> hammock@mars.UUCP (Randy Hammock) writes:
>
>So far, I have not been able to mount MS1: (renamed MSH:).  I just get
>a message -- reserved not assigned.  I have no idea what it is 
>complaining about.  I am runnning a straight WB 1.3, KS 1.2 A2000.
>
>Any thoughts or suggestions?

I got this message too.  The documentation notes that the mountlist
works with the arp 1.3 mount command, but doesn't mention the
commodore command.  As it turns out, it doesn't work with the
commodore mount.  'Reserved not assigned' seems to be referring to the
fact that the supplied mountlist does not have a 'Reserved' parameter.

However, even after mounting with the arp command, all I can get when
I try to access MSH: is an 'insufficient free store' error message.
I've got plenty of ram available, so something is clearly confused.

Looks like I won't be replacing Dos-2-Dos just yet.

-- 
Mark Waggoner  Santa Clara, CA    (408) 721-6306         waggoner@dtg.nsc.com 
 Unofficially representing National Semiconductor Local Area Networks Group
                   Officially misrepresenting myself.