Path: utzoo!attcan!uunet!husc6!think!zaphod.mps.ohio-state.edu!usc!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga
Subject: Re: MSH
Message-ID: <23027@usc.edu>
Date: 22 Feb 90 18:47:24 GMT
References: <23012@usc.edu> <2898@jato.Jpl.Nasa.Gov> <388@icebox.nsc.com>
Sender: news@usc.edu
Organization: Felsina Software, Los Angeles, CA
Lines: 22

In article <388@icebox.nsc.com> waggoner@icebox.UUCP (Mark Waggoner) writes:
|In article <2898@jato.Jpl.Nasa.Gov> hammock@mars.UUCP (Randy Hammock) writes:
||So far, I have not been able to mount MS1: (renamed MSH:).  I just get
||a message -- reserved not assigned.  I have no idea what it is 
||complaining about.  I am runnning a straight WB 1.3, KS 1.2 A2000.
|
|I got this message too.  The documentation notes that the mountlist
|works with the arp 1.3 mount command, but doesn't mention the
|commodore command.  As it turns out, it doesn't work with the
|commodore mount.  'Reserved not assigned' seems to be referring to the
|fact that the supplied mountlist does not have a 'Reserved' parameter.
|However, even after mounting with the arp command, all I can get when
|I try to access MSH: is an 'insufficient free store' error message.
|I've got plenty of ram available, so something is clearly confused.

I have WB 1.3 and KS 1.2 and "mount" worked just fine for me on unit 0
and 2 (which correspond to my df0: and df2:)

-- Marco
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
"Xerox sues somebody for copying?" -- David Letterman
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=