Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!usc!ucsd!ucsdhub!hp-sdd!hp-pcd!hplsla!hpubvwa!grlab!scott From: scott@grlab.UUCP (Scott Blachowicz) Newsgroups: comp.sys.amiga Subject: Re: XPRZmodem Message-ID: Date: 22 Feb 90 15:06:09 GMT References: <9331@portia.Stanford.EDU> Sender: news@grlab.UUCP Distribution: comp.sys.amiga, comp.sys.amiga.tech Organization: Graphicus, Inc., Kirkland, WA USA Lines: 25 In-reply-to: bard@jessica.Stanford.EDU's message of 20 Feb 90 04:59:40 GMT Regarding XPRZmodem; bard@jessica.Stanford.EDU (David Hopper) writes: > My problem now is with the XPRZmodem protocol. It downloads fine with a buffer > size of 1K, but it is TERRIBLY slow. I changed the buffer size to 64K and, as > I am using a floppy system at present, the frame size to 65536 (as the docu- > mentation states as an example). Whenever I download a file greater than 64K, > the protocol times out at exactly 65536K (when the floppy is accessed). I see > no option in the VLT (4.428) protocol window to set the timeout limit. Any > replies would be appreciated. I'm using VLT4.226 (I think) with XPRZmodem, and when I have to go to floppy, I set the sizes for 16K and it works (or at least, it has in the past). This is with a 1200 baud connection, in case that makes a difference. I have yet to bring up 4.428 VLT...does it include XPRKermit or can I find that elsewhere? or should I just stay with XPRZmodem? I'll (hopefully) have access to a Telebit modem soon. Any recommendations for using that on my A1000 with VLT (or VT100, AmiUUCP, etc) would be appreciated. Later, -- Scott Blachowicz E-mail: scott@grlab.UUCP USPS: Graphicus ..or.. ...!hpubvwa!grlab!scott 150 Lake Str S, #206 VoicePh: 206/828-4691 Kirkland, WA 98033 FAX: 206/828-4236