Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!sunic!chalmers!afs-news!hacke9!d5kwedb
From: d5kwedb@dtek.chalmers.se. (Kristian Wedberg)
Newsgroups: comp.sys.amiga
Subject: Re: MSH
Message-ID: <719@vice2utc.chalmers.se>
Date: 26 Feb 90 22:34:01 GMT
References: <23012@usc.edu> <ROSENBER.90Feb22155759@ra.abo.fi> <2414@cpsc6a.att.com> <219@ra.abo.fi>
Sender: news@vice2.utc.chalmers.se
Reply-To: d5kwedb@dtek.chalmers.se (Kristian Wedberg)
Organization: Chalmers University of Technology, Gothenburg, Sweden.
Lines: 16

On the whole, I like MSH, but I've run into two problems.

I edited the mountlist on my A1000, and mounted MS1:
When inserting a PC-disk, AmigaDOS gronks the drive a couple of time, and then
leaves it alone, as it should. When inserting an Amiga-disk, MSH gronks for 
some time, and then puts up an "Unreadable disk!"-requester. Not a BIG problem,
just bothersome. 

My other problem is I too sometimes get 'hidden' files with MSH. These files
show up with ARPs Dir or the filerequester, but not with list. Turning of 
the hidden-flag didn't make any difference. 

Have you got the same problem? I haven't seen the requester-thing mentioned,
so maybe I'm doing something I shouldn't?

	kitte					d5kwedb@dtek.chalmers.se