Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!uwm.edu!cs.utexas.edu!hellgate.utah.edu!uplherc!esunix!jwilliam
From: jwilliam@esunix.UUCP (Jerry Williams)
Newsgroups: comp.sys.amiga.hardware
Subject: 5 1/4 Drive 1.2Meg Disk ?
Message-ID: <1832@esunix.UUCP>
Date: 26 Feb 90 22:49:15 GMT
Distribution: usa
Organization: Evans & Sutherland, Salt Lake City, Utah
Lines: 13

I have been thinking about using a 1.2Meg 5 1/4" drive in a 2000.
What I would like to do is be able to read an IBM format 1.2Meg 5 1/4"
disk. The question that I would like answered is what hardware do I
need to do it. If I buy a 1.2Meg drive can I hook it up and use
something like MSH or CrossDos? Do I need a bridge card?

Thanks for any help!

-- 
Jerry Williams @ Evans & Sutherland    560 Arapeen Drive, SLC, Utah 84108
UUCP Addresses:  {ihnp4,ucbvax,allegra,decvax}!decwrl!esunix!jwilliam
        	 ihnp4!utah-cs!esunix!jwilliam        usna!esunix!jwilliam
                 esunix!jwilliam@cs.utah.edu (Internet)