Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!mcsun!tuvie!inst182
From: inst182@tuvie (Inst.f.Techn.Informatik)
Newsgroups: comp.sys.apollo
Subject: Writing SR10.1 device driver
Message-ID: <1139@tuvie>
Date: 21 Feb 90 16:37:02 GMT
Organization: TU Vienna EDP-Center, Vienna, AUSTRIA
Lines: 9

Has anybody out there some good idea, how to write
a neat, little device driver for DN3500 SR10.1
without buying a big, expensive GPIO compiler?

Any hints will be appreciated

Axel Jantsch
Department for VLSI Design          axel@vlsivie.uucp
Technical University, Vienna        axel@vlsivie.at