Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!DOCKMASTER.NCSC.MIL!TMPLee
From: TMPLee@DOCKMASTER.NCSC.MIL
Newsgroups: comp.sys.apple
Subject: re: PCT/Transwarp woes
Message-ID: <900226024512.667842@DOCKMASTER.NCSC.MIL>
Date: 26 Feb 90 02:45:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 17

(I forgot which in the 30 messages ago this one was, so don't have a
return address.)

a) To get AEPC 2.0 software call Applied Engineering's sales number and
fork over $25.

b) Once you have that you can take care of the Finder's constantly
polling the Transdrive by disabling it (as far as the GS is concerned)
by using a new utility in the 2.0 software.  You can do this and leave
RAMAEPC still usable; they have even modified the RAMAEPC driver so that
it does not initialize on a re-boot.

c) The Transdrive still does not seem to be usable if you have the
TranswarpGS at warp speed; no big deal, however -- you can still get
into the GS CDA's when you are running the PCT and switch speed in
midstream, even after you've gotten the disk error (Abandon, Ignore,
Retry?)  message.