Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!bcm!soma!concurrent-request
From: rick@synapse.neuro.bcm.tmc.edu (Rick Gray)
Newsgroups: comp.sys.concurrent
Subject: Need help digitizing video signals
Message-ID: <217@gazette.bcm.tmc.edu>
Date: 24 Feb 90 21:09:03 GMT
Sender: usenet@bcm.tmc.edu
Lines: 32
Approved: concurrent@soma.neuro.bcm.tmc.edu

There is a demo program called 'image.f' in the Masscomp Graphics
Application Prgramming Manual (Rev. H) that uses the DACP hardware to
digitize the signal from a video camera and display the image on the
screen.  The version in the manual is incomplete (or at least doesn't
include all the connections on the CK10 clock and AD12FA), but I
remember seeing (and trying out) a corrected/expanded version of this
program a few years ago.  At that time I had no need to digitize
images, but now I do and can't find the code.  I also can't remember
whether the corrected code came from the users' group, release notes
or from someone at Masscomp.  I haven't been able to find it in the
comp.sys.masscomp archives or any of our documentation.  Has anyone
archived a working version of this demo program or written something
similar?  
Here's the hardware:
	CK10 clock
	AD12FA 1MHz a/d board
	MC 5520 with DACP
	Dage-MTI SIT or Hamamatsu C2400 camera
We have both 6-plane GA800's and 4-plane GA1000's, some running
Masscomp graphics (SP-40) and others running X11R3 for display.

Thanks,
rick
- --
Rick Gray                            uucp: uunet!soma!rick
Division of Neuroscience         Internet: rick@soma.bcm.tmc.edu
Baylor College of Medicine 
Houston, Tx 77030

Articles to: concurrent@soma.bcm.tmc.edu or uunet!soma.bcm.tmc.edu!concurrent
Administrative stuff: concurrent-request@soma.bcm.tmc.edu
Stan Barber, Moderator