Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!ucla-cs!elroy.jpl.nasa.gov!peregrine!ccicpg!cci632!rit!ultb!cms2839
From: cms2839@ultb.isc.rit.edu (C.M. Stuntz)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Problems exitint Procomm Plus
Message-ID: <2245@ultb.isc.rit.edu>
Date: 18 Feb 90 19:37:05 GMT
References: <16207@oregon.uoregon.edu>
Reply-To: cms2839%ritvax.bitnet@cunyvm.cuny.edu
Distribution: usa
Organization: Information Systems and Computing @ RIT, Rochester, New York
Lines: 29

In article <16207@oregon.uoregon.edu> MICHELBI@oregon.uoregon.edu (Michel Biedermann) writes:
>Why does Procomm Plus (test drive version) ask me if I want to hang up the
>line when I exit.  This happens even when I am not logged on to any thing. 
> 
>Any help would be appreciated.
>
>Thanks
>
>Michel Biedermann	michelbi@oregon.uoregon.edu
>U. of Oregon

				you need to tell your modem to turn on
the data carrier detect line _only then the data carrier is detected .
on my modem ( an ATI 2400etc/i ) , this can be done by putting the
command :

	&C1

in the modem init string ( available in Procomm's setup menus ) . note
that unlike some programs , you need to exit and re - enter Procomm for
the new init string to be effective .

							-a.stranger

-- 
       @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
       @     "Imagination keeps the shadows away  -  Xymox      @
       @~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~@
       @  a.stranger  -  CMS2839%RITVAX.BITNET@cunyvm.cuny.edu  @