Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!ut-emx!nghiem
From: nghiem@ut-emx.UUCP (Alex Nghiem)
Newsgroups: comp.sys.ibm.pc
Subject: AST Rampage /2
Message-ID: <25000@ut-emx.UUCP>
Date: 24 Feb 90 01:23:49 GMT
Reply-To: nghiem@ut-emx.UUCP (Alex Nghiem)
Organization: UTexas Computation Center, Austin, Texas
Lines: 23

Previously I posted a request for jumper configuration for this board.
It was taking a long time for AST to send me the manuals and
software for this board. I just talked with AST today and it turns
out that the items I need are back ordered and will take at least a
month to come in. So while I wait to get an official AST production manual and
software disk for my new board, can <<anyone>> provide me with a
xerox of their manual and a copy of the setup disk for an AST Rampage /2,
part no 202138-002, electronically or otherwise. Much obliged. 
I will pay for shipping if necessary.

The AST Rampage /2 is 64K-2M expanded memory board for the IBM-PC, XT,
PS/2 Model 25, and PS/2 Model 30 which fully supports LIM 4.0 . Intel
has tested this board and found it is compatible with the Intel Inboard 386/PC.

__________________________________________________________________________
This article is posted for factual information only. Any misrepresentation,
if any, is purely unintentional. Any opinion expressed or implicit in
these remarks are solely my own.

nghiem@emx.utexas.edu
!cs.utexas.edu!ut-emx!nghiem
nghiem@walt.cc.utexas.edu
!cs.utexas.edu!ut-emx!walt!nghiem