Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucsd!hub!6600bike
From: 6600bike@hub.UUCP (Puneet Pasrich)
Newsgroups: comp.sys.mac.hardware
Subject: Re: 68030 Accelerator (Info Wanted)
Message-ID: <4106@hub.UUCP>
Date: 28 Feb 90 00:53:25 GMT
References: <6061@blake.acs.washington.edu>
Sender: news@hub.UUCP
Distribution: na
Lines: 16

From article <6061@blake.acs.washington.edu>, by hklee@blake.acs.washington.edu (Hyeon Kyu Lee):
> 
> I have an Mac SE and want to upgrade it.  From the recent "Mac World",
> I found that Mac Product USA offers a quite inexpensive accelerator
> board. (Less than $600 for 16MHz 68030 board.)
Don't go through MacProdcuts!  I bought a Microtech 300Z from them, and
_they_ didn't ship the SCSI box that comes with it.  And they blamed it
on _me_!!!  Scum.  I called them enough that they dealt with it, but it
was too much of a pain.  I'll gladly spend a couple extra bucks so that
I don't have to deal with them.  
A very unhappy customer (with MacProducts); the scanner itself is RAD,

  ___________________________________________________________
  |Puneet Pasrich  |  Internet:  6600bike@ucsbuxa.ucsb.edu  |
  |Karate Kid      |  Bitnet:    6600bike@ucsbuxa.bitnet    |
  |'Just do it!'   |                                        |