Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!pyrdc!gmu90x!gmuvax2!gklimes
From: gklimes@gmuvax2.gmu.edu (George Klimes)
Newsgroups: comp.sys.tandy
Subject: Re: 1000TL W/ Windows or DESQview
Summary: There is another source.
Keywords: 1000TL EMS Windows DESQview
Message-ID: <839@gmuvax2.gmu.edu>
Date: 24 Feb 90 01:35:13 GMT
References: <1990Feb19.051532.22981@Neon.Stanford.EDU> <7923@inco.UUCP> <3007@pooh.oakhill.UUCP>
Reply-To: gklimes@gmuvax2.gmu.edu (George Klimes)
Distribution: comp.sys.tandy
Organization: George Mason Univ. Fairfax, Va.
Lines: 24

Someone mentioned that Micro Mainframe was the only place to get LIM
boards for the Tandy 1000 series. And this person mentioned that Radio 
Shack carries the same board.

There is at least one other source. A company called "Computer Mechanix"
sells lots of stuff for Tandy machines. In fact, they make sure everything
they sell works correctly on the intended machines before selling it. Their 
expanded memory board for any Tandy 1000 (except HX/EX) costs $149.00
with 0K. Maximum memory is 2 Megs. They sell 256K sets for $35. NOTE: You
can have FOUR of these boards installed, for a total of EIGHT megs!

I've haven't tried these guys (sold my 1000), but they seem OK.

Toll free order number is 1-800-448-1436.

They can send a price listing. NOTE: They also sell HIGH density drive
kits for the 1000 series!!!

If anyone buys from them, let me know how it went - as I have a 3000HL
and might be looking for new stuff soon.


--- George Klimes
    Graduate Student, CS