Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!batcomputer!cornell!uw-beaver!Teknowledge.COM!unix!hplabs!hpfcso!hppad!kempff
From: kempff@hppad.HP.COM (John Kempff)
Newsgroups: comp.windows.ms
Subject: Re: TI TMS340 boards for Windows?
Message-ID: <2730001@hppad.HP.COM>
Date: 21 Feb 90 19:12:28 GMT
References: <3914@hub.UUCP>
Organization: HP Panacom Automation Div Waterloo, Ont.
Lines: 35

/ hppad:comp.windows.ms / grosen@amadeus.ucsb.edu (Mark D. Grosen) /  9:15 pm  Feb 11, 1990 /

I need a faster display for Windows and am looking for recommendations
for TI TMS340xx graphics processor based boards.  So far, the only
board I have found that has Windows drivers is the NEC (or GSS)
Multi-sync Graphics Engine Board.  It's about $1400 for the 1024x768 256
color model.  Can anybody else recommend any other boards?

Mark

Mark D. Grosen		ARPA: grosen@amadeus.ucsb.edu
Signal Processing Lab / Communications Research Lab
ECE Dept.
University of California
Santa Barbara, CA  93106
----------

Hi Mark.

Hewlett-Packard has two graphics cards that may interest you.

The Intelligent Graphics Controller 10 (IGC10) is a 34010 based
controller card, and the Intelligent Graphics Controller 20 (IGC20)
is a 34020 based controller card.  From experience I know that the
IGC10 card comes with a Windows286 and Windows386 driver.  I believe
that the IGC20 also has window drivers for it.

By the way the part numbers for these cards are:
IGC10 is A1086A and the IGC20 is A1083A.

Call your local HP sales office or sales rep for more information.


John Kempff
kempff@hppad.HP.COM