Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!cs.utexas.edu!ut-emx!walt.cc.utexas.edu!ycy
From: ycy@walt.cc.utexas.edu (Joseph Yip)
Newsgroups: sci.electronics
Subject: VMEbus cable
Message-ID: <24902@ut-emx.UUCP>
Date: 22 Feb 90 17:13:18 GMT
Sender: news@ut-emx.UUCP
Reply-To: ycy@walt.cc.utexas.edu (Joseph Yip)
Distribution: usa
Organization: The University of Texas at Austin, Austin, Texas
Lines: 15

We have bought a Series 100 frame grabber board from Imaging Technology Inc.
We intend to put it into a Sun 4 (VMEbus). However, the board is a "half"
size card. The Sun 4 slot is a "full" size one. So, the board is not
about to connect or mate with the bus connector. What we need is a 
cable extender (1 foot)? The VMEbus connector is 96 pins (3 x 32 pins).

Does anyone know who sells VMEbus cable extender? Or does anyone have
a better idea to solve this problem?

Thanks

Joseph Yip
The University of Texas at Austin
Email: ycy@happy.cs.utexas.edu
Phone: 512-471-1862