Xref: utzoo comp.unix.xenix:10385 comp.dcom.modems:5363
Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!crdgw1!sixhub!davidsen
From: davidsen@sixhub.UUCP (Wm E. Davidsen Jr)
Newsgroups: comp.unix.xenix,comp.dcom.modems
Subject: Re: UUCP performance under SCO Xenix 2.2.1
Keywords: uucp xenix modem hayes
Message-ID: <566@sixhub.UUCP>
Date: 3 Mar 90 04:35:56 GMT
References: <18051@rpp386.cactus.org>
Reply-To: davidsen@sixhub.UUCP (bill davidsen)
Followup-To: comp.unix.xenix
Distribution: comp
Organization: *IX Public Access UNIX, Schenectady NY
Lines: 14

In article <18051@rpp386.cactus.org> deano@rpp386.UUCP (Dean Carpenter) writes:
| I'm running SCO Xenix 2.2.1 on an IBM AT (8MHz) with a Hayes 2400 V series
| modem.  I've noticed some pretty poor performance with uucp at 2400 baud,
| namely about 160 cps.  At 1200 I'm getting about 110 cps though.  The modem
| is hung off an IBM 0-12meg card, which has serial and parallel ports on
| the card.  Shouldn't I be getting about 220 cps or so ?

  You have to set your windows to seven instead of three, which is
default. Check the manual.
-- 
bill davidsen - davidsen@sixhub.uucp (uunet!crdgw1!sixhub!davidsen)
    sysop *IX BBS and Public Access UNIX
    moderator of comp.binaries.ibm.pc
"Getting old is bad, but it beats the hell out of the alternative" -anon