Path: utzoo!censor!geac!torsqnt!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!philmtl!altitude!pascal
From: pascal@altitude.UUCP (Pascal Gosselin)
Newsgroups: comp.dcom.modems
Subject: Does T2500 support MNP at 9600 with USR HST 9600/14400 ?
Keywords: T2500 HST MNP 9600 14400
Message-ID: <1990Mar4.045118.4988@altitude.UUCP>
Date: 4 Mar 90 04:51:18 GMT
Organization: None
Lines: 25

Could someone please tell me if the newest T2500's support
MNP level 5 at 9600 when connected to a US Robotics HST 9600/14400 ??

I had the chance to test out a T2000 with an HST 9600, but the
best speed available was (as advertised) 2400 bps  at MNP level 4.

What is the MNP level used by the HST 14400 ?  Is it Level 9 ?
Does the HST 9600 use Level 5 or 6 MNP ???  What makes the HST 14400 go
faster than the HST 9600, a higher MNP level or more Bps per channel?

How efficient are MNP Level 5 2400's when reading messages such as these???


That's about it!

-- 
+--------------------------------------------------------------------+
| Pascal Gosselin          |   philmtl!altitude!pascal@uunet.uu.net  |
| Computer Connection Inc. |     (514) 670-5016   CIS: 72757,1570    |
+--------------------------------------------------------------------+
-- 
+--------------------------------------------------------------------+
| Pascal Gosselin          |   philmtl!altitude!pascal@uunet.uu.net  |
| Computer Connection Inc. |   AppleLink: CDA0024   CIS: 72757,1570  |
+--------------------------------------------------------------------+