Path: utzoo!attcan!uunet!van-bc!ubc-cs!alberta!dvinci!weyr!bill.nobel
From: bill.nobel@weyr.FIDONET.ORG (bill nobel)
Newsgroups: comp.os.os9
Subject: re: Microware C Compiler for OS-9
Message-ID: <573.25EE0CBB@weyr.FIDONET.ORG>
Date: 2 Mar 90 04:05:35 GMT
Organization: Benden Weyr, Saskatoon Sk. (306)-382-5746
Lines: 12


  Jef you will have to do a couple of patches to get the C compiler to work off of hard drive.  You can use the modpatch command to do these patches.  The patches are as follows:
 
  Load c.prep into memory and change the byte at offset $135c and $135d to the name of the drive you want (e.g. $135c=68 'h' $135d=30 '0'). then load cc1 and to the same thing except at the offsets of $0ee5 and $0ee6.  Be sure to verify and save the modules back to disk otherwise you will have to do this patch again.  If you have the developers pak and EZgen then you can replace c.asm and c.link with RMA and RLINK by renaming them with EZgen.
 
-Bill-

--  
bill nobel - via FidoNet node 1:140/22
UUCP: alberta!dvinci!weyr!bill.nobel
Internet: bill.nobel@weyr.FIDONET.ORG
Standard Disclaimers Apply...