Xref: utzoo rec.ham-radio.packet:3308 comp.protocols.tcp-ip.ibmpc:2481
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!usenet.ins.cwru.edu!cwjcc!ncoast!tbell
From: tbell@NCoast.ORG (Terry Bell)
Newsgroups: rec.ham-radio.packet,comp.protocols.tcp-ip.ibmpc
Subject: KA9Q "Mulport" HELP
Message-ID: <1990Feb27.152949.28222@NCoast.ORG>
Date: 27 Feb 90 15:29:49 GMT
Reply-To: tbell@ncoast.UUCP (Terry Bell)
Distribution: usa
Organization: North Coast Public Access UN*X, Cleveland, OH
Lines: 24

I am attempting to install the "mulport" command using the KA9Q tcp/ip
software package. I would like to know what the proper procedure is for
a user to digipeat thru me. My DIGILIST file is setup in the following
manner.

digi          interface
k8zfr         507               ( FYI 507 is interface attached to 145.07 )
wa8bxn        501               ( FYI 501 is interface attached to 145.01 )

ax25 mycall is n8hsp-4. Would a user enter the following?

connect w8xxx via k8zfr n8hsp-4 wa8bxn w8yyy

What I would like to accomplish is to have a user on 145.01 digi thru me
and connect to a user on 145.05

Thanks in advance.
73, terry

-- 
******************************************************************************
Terry Bell       FreeNet ab617@po.cwru.edu      UUCP: uunet!cwjcc!ncoast!tbell
N8HSP @WA8BXN.OH.USA.NA       AMSAT-NA       [44.70.4.10] tbell@n8hsp.ampr.org
******************************************************************************