Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!mips!apple!rutgers!bellcore!ka9q.bellcore.com!karn
From: karn@ka9q.bellcore.com (Phil Karn)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Giving each interface an IP address in KA9Q
Message-ID: <20653@bellcore.bellcore.com>
Date: 7 Mar 90 02:42:34 GMT
References: <CC4FC6A04D9FE01B5F@rvax.ccit.arizona.edu>
Sender: news@bellcore.bellcore.com
Reply-To: karn@ka9q.bellcore.com (Phil Karn)
Organization: Secular Humanists for No-Code
Lines: 8


A while ago I removed the ip address arguments from the attach commands;
they're probably being ignored in your version. To set an IP address
on an interface, use the ifconfig command after attaching the interface:

ifconfig lan ipaddr 1.2.3.4

Phil