Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!snorkelwacker!spdcc!mirror!ssi3b1!pselver
From: pselver@ssi3b1.zone1.com (Peter Selverstone)
Newsgroups: comp.sys.amiga.tech
Subject: Re: NTSC -> PAL
Keywords: PAL NTSC Amiga resolution
Message-ID: <1990Feb27.235318.24051@ssi3b1.zone1.com>
Date: 27 Feb 90 23:53:18 GMT
References: <1990Feb25.154442.2634@uunet!unhd>
Reply-To: pselver@ssi3b1.UUCP (Peter Selverstone)
Organization: Spy Pond Systems
Lines: 17

In article <1990Feb25.154442.2634@uunet!unhd> ncf@unhd.unh.edu.UUCP (Nick C Fitanides) writes:
>    I would like to know if there's a way to use PAL on a 2000 with a Flicker
>Fixer and a Zenith 14" VGA monitor.

Flicker fixer comes in two versions, NTSC and PAL. You cannot use PAL with
an NTSC flicker fixer.

>  Also, what cable do I need to connect
>the monitor to the normal 2000 video port?

VGA monitors like the Zenith cannot be connected directly to the Amiga.
They will not operate at the 15.75 KHz scan rate that the Amiga uses.
-- 
Peter Selverstone ...{mit-eddie,pyramid,datacube}!mirror!ssi3b1!pselver
Spy Pond Systems  pselver@ssi3b1.zone1.com
Arlington, MA     BIX:pselverstone   PLINK:pselverst   CIS:72527,2652