Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!van-bc!rsoft!mindlink!a186 From: a186@mindlink.UUCP (Harvey Taylor) Newsgroups: comp.sys.amiga.tech Subject: Reading Autoconfig Parameters From a Card (re: 2091 SetCPU p Message-ID: <1255@mindlink.UUCP> Date: 4 Mar 90 01:26:17 GMT Organization: MIND LINK! - British Columbia, Canada Lines: 56 Okay here is a little program that will tell you what AutoConfig boards you have. Run this through shar, uudecode and zoo. Note that this stuff is all documented in RKM_1.3_L&D. # This is a shell archive. # Remove everything above and including the cut line. # Then run the rest of the file through sh. #----cut here-----cut here-----cut here-----cut here----# #!/bin/sh # shar: Shell Archiver # Run the following text with /bin/sh to create: # pacd4.zuu # This archive created: Sun Mar 4 14:58:23 1990 echo shar: extracting pacd4.zuu sed 's/^XX//' << HAR_EOF > pacd4.zuu XX XXbegin 644 pacd4.zoo XXM6D]/(#(N,#`@07)C:&EV92X:``#5BB$`1#3BD."X@",Q6G5$1F;5A$2)C!VIM5$9'9:'5@&((`Q+JT0"`<`1 XXMP!A?8@`*&&MBK$\VA"@#@1!Q0R)&&G XXM&W2`$$0==+PQQ!MNF)'&&2`0488=:8Q1!@A)!/N&`E:4(<<<:0`+`@PNP!!#O XXMK+C)&@<(WH(@KKC>DO'&'"ZPD888:BO#( XXM##348,,-..00A!"N%F&$0+,6,6^]][HAY!ONDC$'"$:\48<;9"C0PL<@ARSR# XXMR"UP*ZT+3=1;AQEAC$%''7)("T(/X,8KAPNUOD%&'2Z/.R[-`IU,11YP+.NS! XXMST#;[((1;(1QQL5'BYOTRL1H1!1QAL@%"$I XXM''*\(0<((\#`[4"A#K1.1`C)$Q#