Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!usc!ucla-cs!ucla-seas!island!rlee
From: rlee@island.seas.ucla.edu (Robert Lee)
Newsgroups: comp.sys.apollo
Subject: Apollo prmgr troubles
Keywords: print manager, prmgr, domain
Message-ID: <451@lee.SEAS.UCLA.EDU>
Date: 7 Mar 90 03:31:18 GMT
Sender: news@SEAS.UCLA.EDU
Distribution: usa
Organization: SEASnet, University of California, Los Angeles
Lines: 13

I'm having quite a bit of trouble getting a serial printer to work with
a 4500 running SR10.1;  the print manager doesn't run.  Prmgr returns
a "can't find print manager" message after invocation, goes to sleep for
30 seconds or so, and retries.  The hardware is fine; the workstation
and printer talks to each other under the sys5 print model, i.e. lpsched/lp
instead of prf/prmgr/prsvr.

What am I doing wrong?  The only documentation I have handy are those provided
online, where I have found no explanation of prmgr error messages.

Robert Lee                (Above opinions are my own and etc, etc, etc...)
InterNet: rlee@island.seas.ucla.edu
UUCP:  ...!(uunet,ucbvax,rutgers)!island.seas.ucla.edu!rlee