Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!yale!umich!sharkey!cfctech!teemc!fmeed1!wehr
From: wehr@fmeed1.UUCP (Bruce Wehr)
Newsgroups: comp.sys.hp
Subject: Re: How do you do UUCP over the Ethernet with HP-UX 6.5?
Message-ID: <5730@fmeed1.UUCP>
Date: 1 Mar 90 18:51:57 GMT
References: <5634@fmeed1.UUCP> <1080130@hpfcmgw.HP.COM>
Organization: Ford Electronics Division, Dearborn MI
Lines: 28

In article <1080130@hpfcmgw.HP.COM>, rdg@hpfcmgw.HP.COM (Rob Gardner) writes:
> 
> > Although I have never done it there is a description of how-to in the 
> > HP-UX Concepts and Tutorials: Shells and Miscellaneous Tools ,
> > HP part # 97089-90062. Refer to the section on Vt.
> 
> The vt/uucp stuff only works between HP machines.
> 
> Rob

It definitely makes interesting reading - I *do* have some HP machines
I'd like to do this with.  However, my Concepts manual talks about
setting this up in terms of old-style UUCP (L-vtdevices, L-devices,
L.sys - needless to say, it doesn't work).  So, 2 questions:

	1) Does anyone know how to set this up to HP machines using HDB
	   UUCP?

	2) Are there any plans to support this to non-HP machines in the
	   future?

Thanks to all who've helped so far.

-- 
	       Bruce Wehr (wehr%dptc.decnet@srlvx0.srl.ford.com)
    (...!mailrus!sharkey!fmeed1!wehr) (wehr%fmeed1.uucp@mailgw.cc.umich.edu)
		   Ford Motor Company - Electronics Division
  17000 Rotunda Drive, ETC Room LN081, Dearborn, Michigan 48121 (313)845-3039