Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!lavaca.uh.edu!uhnix1!nuchat!shell!svh
From: svh@shell
Newsgroups: comp.sys.ibm.pc
Subject: Looking for info on drives, monitor
Message-ID: <1583@shell.shell.com>
Date: 5 Mar 90 20:00:46 GMT
Sender: usenet@shell.com
Reply-To: svh@shell ()
Distribution: usa
Organization: Shell Oil Company
Lines: 23

I have two IBM model 5151 monochrome monitors that are currently inop. 
If some kind soul would be so nice as to mail me a copy of the schematic, I
would be grateful. Thanks.

I also have several used 3.5" 20MB hard drives that were originally (I'm told)
in a Hewlett-Packard Vectra "classic" (their first "clone") machine (c. 1985)
I'd like to use these drives elsewhere, but need a pinout for the rear connector
(double row of header pins) and info on the drive, like how many heads,
cylinders, how to connect to a controller card, power requirements, etc. 

I offer one of these drives to the first person who can tell me exactly what 
I need to do to get the others running on an XT clone.
These units bear the part number HP97500-85620.

Mailing address :
	Steven V. Hovater
	16623 Royal Mile
        Houston, TX 77084

Steven V. Hovater      Shell Development Company     (713) 663-2711 (work)
                                                     (713) 550-7802 (home)
svh%shell.uucp@sun.com or svh%shell.uucp@rice.edu or svh@shell.uucp 
 or ...!{sun,bcm,rice,psuvax1,decwrl,cs.utexas.edu}!shell!svh