Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!umich!vela!bbesler
From: bbesler@vela.acs.oakland.edu (Brent Besler)
Newsgroups: comp.sys.ibm.pc
Subject: Re: QEMM freezes computer
Message-ID: <234@vela.acs.oakland.edu>
Date: 5 Mar 90 19:24:55 GMT
References: <2764@aecom.yu.edu>
Reply-To: bbesler@vela.acs.oakland.edu (Brent Besler)
Distribution: na
Organization: Oakland University, Rochester MI
Lines: 10

I have had similar wierd problems with Desqview on a Jameco 386/20 motherboard
with an AMI bios.  I am using QEMM version 4.23 and device=qemm.sys is 
the first line in config.sys.  If I had any parameters at all the system
would lock up, requiring a hardware reset.  I would get a Internal Stack
Overflow System Halted error.  The cause was having device=ansi.sys anywhere
in the config.sys file.  I can load a bunch or other dd's into both normal
and high memory, but ansi.sys locks up QEMM with any parameters on the line.
With no parameters, is and ansi.sys work fine.  I am using PC DOS 3.31.

                                         Brent H. Besler