Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: schenker@tdw220.ed.ray.com
Newsgroups: comp.sys.sun
Subject: Re: Setting up a Sun as a router
Keywords: Networks
Message-ID: <5400@brazos.Rice.edu>
Date: 1 Mar 90 17:31:10 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 7
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n61
X-Sun-Spots-Digest: Volume 9, Issue 61, message 12

In order to use the machine as a router, you should check with netstat -r
to see if routing is taking place.  If not, you can add routing with
either an entry in /etc/gateways ( and then rebooting) or by using
/usr/etc/route.  Then check again with netstat to make sure routing is
occurring.  We currently have several routers in place and working.

Also make sure routed has been started.