Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!pride386!terry
From: terry@pride386.UUCP (Terry Lyons)
Newsgroups: comp.unix.xenix
Subject: Re: SCO UNIX & Mylex CPU
Summary: roms
Keywords: Serial port mess
Message-ID: <210@pride386.UUCP>
Date: 5 Mar 90 07:30:42 GMT
References: <1729@lakesys.lakesys.com>
Distribution: usa
Organization: Pride Plastics Inc., Buena Park, CA
Lines: 17

In article <1729@lakesys.lakesys.com>, deanr@lakesys.lakesys.com (Dean Roth) writes:
>
> The problem:
> -----------
>
> I have a Mylex 386 25MHz CPU with ESDI disk
> and SCO UNIX 3.2.  The OS insists the system
> has an Arnet 8 port serial board on COM1 & COM2.
> This is no Arnet controller in it, never has been.
 

Call Mylex I had the same thing
the answer is there are 1 or 2 chips that HAVE to be changed to run xenix
(which they will gladly do) once that is done its warp speed (by the way once 
you get it going check and see if the battery powered clock works..please let me 
know) mine didn't work UNTIL we had a  page fault error (think idleout is the 
culprit)