Xref: utzoo comp.unix.xenix:10426 comp.unix.i386:3333
Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!jarthur!elroy.jpl.nasa.gov!peregrine!ccicpg!legs!carl
From: carl@legs.UUCP (Carl E. Garringer)
Newsgroups: comp.unix.xenix,comp.unix.i386
Subject: Re: Western Digital WD8003EB with SCO UNIX 3.2
Message-ID: <2538@legs.UUCP>
Date: 5 Mar 90 17:54:57 GMT
References: <593@kivax.UUCP>
Organization: AST Research, Systems Software Engineering, Irvine, CA
Lines: 19

in article <593@kivax.UUCP>, cmc@kivax.UUCP (Crampton) says:
> I can use WD8003E and WD8013E cards without problems and the same machine
> when booted with DOS can use the ethernet controller okay.
  
> The space.c file for the Western Digital UNIX driver mentions only
> WD8003E and WD8003EBT cards.  What is the difference between the EB and
> EBT models?  Should the WD8003EB card work at all?
  
> Is there anyone out there who is successfully using one of these cards
> with SCO UNIX?
I am using this card without problems. I am using IRQ 2, the B card does not
support IRQ 5.
The card must be configured with the setup disk under DOS before installing
for SCO UNIX.
-- 
Carl E. Garringer                   uucp: ...uunet!ccicpg!legs!carl
c/o AST Research Inc. Dept 660      Fax: (714) 727-9358
P. O. Box 19658                     Tel: (714) 727-8631
Irvine, California 92713-9658