Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!brutus.cs.uiuc.edu!uakari.primate.wisc.edu!aplcen!uunet!willett!ForthNet
From: ForthNet@willett.UUCP (ForthNet articles from GEnie)
Newsgroups: comp.lang.forth
Subject: Files on-line
Message-ID: <648.UUL1.3#5129@willett.UUCP>
Date: 13 Mar 90 02:27:49 GMT
Organization: Latest link in the ForthNet chain.  (Pgh, PA)
Lines: 28

Category 1,  Topic 3
Message 229       Mon Mar 12, 1990
D.RUFFER [Dennis]            at 01:29 EST
 
[If there is interest, I'll try to get this onto SIMTEL20.  --dwp]

>>> New File <<<

  No. File Name      Type Address       YYMMDD    Bytes Accesses Lib
 2013 1802SIM.ARC     X   P.FRENGER     900311   211680      0     7
  Desc: RCA 1802/6 simulator in F83

These programs outline a special software/hardware project undertaken recently
by the Houston, Texas chapter of FIG, to simulate an RCA 1802/6 microprocessor
while creating project boards to run FIG-Forth. F83 was used for the
simulator, running on an IBM PC. The hardware resources of the 1802 and 1806
were simulated in Forth. A straightforward interface program was designed to
allow loading/running/debugging real 1802/6 programs on the PC environment.
Eventually, the 1802 FIG-Forth (which is included) was loaded and run on the
simulator. Alberto Pasquale, a long-time FIG member in Houston, wrote up this
project in Vol.1 No.3 of the ACM SIGForth Newsletter. Contact "P.FRENGER" for
SIGForth details.

Keywords: EMULATION, SIMULATION, RCA 1802/6, FIG-Forth, F83 Applications

-----
This message came from GEnie via willett through a semi-automated process.
Report problems to: 'uunet!willett!dwp' or 'willett!dwp@gateway.sei.cmu.edu'