Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!hp4nl!mhres!jv From: jv@mh.nl (Johan Vromans) Newsgroups: comp.sources.d Subject: Re: perl 3.0PL12 on ULTRIX 3.1 -- anyone got it compiled? Message-ID: Date: 7 Mar 90 03:44:09 GMT References: <1990Mar5.162315.25784@gumby.cc.wmich.edu> <1990Mar5.182642.23419@iwarp.intel.com> Sender: jv@mhres.mh.nl Organization: Multihouse Gouda, the Netherlands Lines: 17 In-reply-to: merlyn@iwarp.intel.com's message of 5 Mar 90 18:26:42 GMT In article <1990Mar5.182642.23419@iwarp.intel.com> merlyn@iwarp.intel.com (Randal Schwartz) writes: `On my machine, the `following 'ed' commands (translate that into your favorite editor) `will do the trick at the 'edit config.sh via shell escape here:' `prompt: ` /volatile/s/define/undef/ <<<--- this is probably the problem This is not needed if you use gcc w/o -traditional. Just another perl, err... okay, copyrighted, I know :-) Johan -- Johan Vromans jv@mh.nl via internet backbones Multihouse Automatisering bv uucp: ..!{uunet,hp4nl}!mh.nl!jv Doesburgweg 7, 2803 PL Gouda, The Netherlands phone/fax: +31 1820 62944/62500 ------------------------ "Arms are made for hugging" -------------------------