Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!rutgers!bellcore!texbell!texsun!newstop!sun!stpeter!cmcmanis
From: cmcmanis@stpeter.Sun.COM (Chuck McManis)
Newsgroups: comp.sys.amiga
Subject: Re: Amiga project feedback.
Message-ID: <132704@sun.Eng.Sun.COM>
Date: 8 Mar 90 20:01:13 GMT
References: <13188@baldrick.udel.EDU>
Sender: news@sun.Eng.Sun.COM
Reply-To: cmcmanis@sun.UUCP (Chuck McManis)
Organization: Sun Microsystems, Mountain View
Lines: 19

In article <13188@baldrick.udel.EDU> (Marc Barrett) writes:
> I need some feedback on a little project I've been considering for the Amiga.
> It is very, very simple electronically, but may come in handy when the ECS
> comes out.
>
>  As many of you know, the Amiga uses a 28.5Mhz clock ...
>  I ... would replace the 28.5Mhz clock with a 40Mhz signal. 

Don't bother, just under 30Mhz and the system can't handle it any more. 
If you can get access to a school EE lab you can do the experiment very
simply, just hook up a frequency generator and crank it up. The advantage
of using the freq generator is that you can also vary the duty cycle and
see how that helps. 


--Chuck McManis
uucp: {anywhere}!sun!cmcmanis   BIX: cmcmanis  Internet: cmcmanis@Eng.Sun.COM
These opinions are my own and no one elses, but you knew that didn't you.
"If it didn't have bones in it, it wouldn't be crunchy now would it?!"