Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!rpi!uupsi!njin!limonce
From: limonce@pilot.njin.net (Tom Limoncelli)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Overscan Questions
Keywords: how to do it
Message-ID: <Mar.7.15.45.57.1990.2105@pilot.njin.net>
Date: 7 Mar 90 20:45:58 GMT
References: <Mar.7.01.39.58.1990.12657@pilot.njin.net>
Organization: Drew University/NJIN
Lines: 17

In article <Mar.7.01.39.58.1990.12657@pilot.njin.net> limonce@pilot.njin.net (Tom Limoncelli) writes:

> Is the source code to MoreRows available?  I assume that they Do It
> Right so I would like to work from that code.

Oops!  I forgot.  There is no "supported way" to do overscan and this
program will break under 1.4... but I'll document that and delete all
my source when 1.4 ships :-)

Same with preferences... but you knew that, didn't you? ;-)

-Tom
-- 
Tom Limoncelli       The computer industry should spend more time in front of
tlimonce@drew.uucp              their computers.  Remember when "Look & Feel"
tlimonce@drew.Bitnet                      was what you tried to do on a date?
limonce@pilot.njin.net